rssmedianet

Extech EX810 Information the information about the Extech EX810: Introduction The Extech EX810 is a 1000-amp AC clamp meter with a built-in infrared thermometer. It is a versatile tool that can be used for a variety of electrical and electronic measurements, including current, voltage, resistance, capacitance, frequency, and temperature. The EX810 is also equipped with a number of features that make it ideal for professional use, such as auto-ranging, peak hold, and data hold.

Makita LD080P Information The Makita LD080P is a laser distance measure that offers a fast and convenient solution to distance measuring applications. It has a distance operating range of up to 262 feet (80 meters) for moderate distance capacity, and a top-class accuracy of +/- 1/16" for maximum precision. It also provides both standard and metric units of measurement, and 9 measurement functions for increased versatility of applications: Distance Area Volume Permanent Min/Max Add/Subtract Stake-Out Pythagoras (2 point) Pythagoras (3 point) Pythagoras (partial height) The LD080P is also equipped with a bright 635 nm class II (<1mw) laser for best-in-class visibility in moderate ambient light environment. It has a battery run time of up to 5,000 measurements for continuous work and increased productivity. Image:

Remington RM23 Information The Remington RM23 is a 23-ton gas-powered log splitter that is designed for splitting firewood. It has a powerful 159cc OHV engine that provides plenty of splitting force, and it can be used in either the horizontal or vertical position. The RM23 also features a pre-filled hydraulic system, so you can start splitting right away. It is also D.O.T. road towable, so you can easily transport it to where you need it. Image: Specifications:

Parkside PPHSS 730 SE Information The Parkside PPHSS 730 SE is a corded jigsaw that is perfect for a variety of DIY projects. It features a powerful 730-watt motor that can handle even the most demanding tasks, and a variable speed control that allows you to adjust the cutting speed for different materials. The jigsaw also has a laser guide that helps you make precise cuts, and a dust extraction port that helps to keep your work area clean. Image: Specifications:

Güde 415/10/50 N Information the information about the Güde 415/10/50 N air compressor: Introduction The Güde 415/10/50 N is a powerful and versatile air compressor that is perfect for a variety of home and workshop applications. It features a 2-cylinder, ölgeschmiertes V-Aggregat with a maximum pressure of 10 bar and a 50-liter steel barrel. The compressor also includes a number of features that make it easy to use and maintain, such as a pressure switch, pressure regulator, and two pressure gauges.

Fluke 8808A Information The Fluke 8808A is a high-precision digital multimeter that is designed for demanding industrial and commercial applications. It features a wide range of measurement functions, including AC/DC voltage, current, resistance, capacitance, frequency, duty cycle, temperature, and continuity. The 8808A also has a number of advanced features, such as a dual display, a data hold function, and a max/min hold function. Image of Fluke 8808A digital multimeter Specifications

Remington RM1425 Information The Remington RM1425 is a 14-inch electric chainsaw that is designed for light-duty tasks such as limbing, trimming, and cutting small trees. It is powered by an 8-amp electric motor that provides enough power to handle most pruning jobs. The chainsaw has a low-profile chain that helps to reduce kickback, and it features a manual chain tensioning system that makes it easy to keep the chain properly adjusted. Image of Remington RM1425 chainsaw Specifications

Black & Decker CP1421K Information The Black & Decker CP1421K is a cordless drill that is designed for light-duty tasks around the home. It features a 12-volt NiCd battery that provides up to 15 minutes of run time, and a variable speed trigger that allows you to control the amount of power you need. The drill also has a 1/2-inch chuck that can accept a variety of drill bits, and a belt clip for easy carrying. Image

Stihl HS 85 Information The Stihl HS 85 is a powerful and versatile hedge trimmer that is ideal for homeowners and professional landscapers. It features a 2-stroke engine that delivers 1.35 horsepower, making it capable of trimming even the thickest and most overgrown hedges. The HS 85 also has a long reach, thanks to its 75 cm (29.5 in) cutting head, which makes it easy to trim high hedges and shrubs. Specifications

Laserliner StarFinder Information Introduction The Laserliner StarFinder is an electronic ortungsdienst that is designed to help you find live cables and wires in walls and ceilings. It can also be used to locate wooden and metal beams. The StarFinder is a safe and easy-to-use tool that can help you avoid accidental damage to electrical wiring. Image

Husqvarna 115iHD55 Information The Husqvarna 115iHD55 is a cordless hedge trimmer that is designed for homeowners with small to medium-sized hedges. It is powered by a 40V lithium-ion battery and features a 22-inch dual-action blade that can cut branches up to 0.63 inches thick. The trimmer is also equipped with a savE™ mode that can extend the battery runtime by up to 20%. Image of Husqvarna 115iHD55 hedge trimmer Here are the full specifications of the Husqvarna 115iHD55 hedge trimmer:

DeWalt D25762 Information The DeWalt D25762 is a 1500-watt SDS-Max rotary hammer drill that is designed for heavy-duty applications such as drilling through concrete, masonry, and brick. It features a powerful motor that generates up to 15.5 joules of impact energy, making it capable of drilling large holes in even the toughest materials. The D25762 also features a two-speed transmission that allows you to select the optimal speed for your application, as well as an electronic speed control that lets you fine-tune the speed for precise drilling. Here is an overview of the DeWalt D25762's specifications: Motor: 1500 watts Impact energy: 15.5 joules Speed: 125-250 RPM / 1150-2300 BPM Chuck type: SDS-Max Maximum hole diameter: Concrete: 52mm Masonry: 40mm Steel: 13mm Wood: 38mm Tool weight: 9.9kg Tool length: 561mm

Makita LS1040N Information The Makita LS1040N is a 10-inch compound miter saw that is designed for a variety of woodworking applications, including miter cuts, bevel cuts, and compound cuts. It features a powerful 1650-watt motor that delivers up to 4,600 RPM for smooth, accurate cutting. The saw also has a dual-post compound pivoting arm that allows for bevel cuts up to 45° to the left. Here is a table of the full specifications of the Makita LS1040N:

Laserliner MultiMeter Information Laserliner is a German company that manufactures a wide range of tools and measuring devices, including multimeters. The Laserliner multimeters are known for their accuracy, durability, and ease of use. They are available in a variety of models, each with its own set of features and specifications. Introduction A multimeter is a device that is used to measure electrical quantities such as voltage, current, and resistance. It is an essential tool for anyone who works with electrical equipment, such as electricians, technicians, and hobbyists.

DeWalt DWS520 Information The DeWalt DWS520 is a 6-1/2-inch track saw that combines the precision and cut-quality of a table saw with the portability of a circular saw. It is a great choice for finish carpenters, woodworkers, and contractors who need to make straight, splinter-free, precise cuts in a variety of materials. Specifications

Bosch GKT 55 GCE Professional Information The Bosch GKT 55 GCE Professional is a corded plunge saw that delivers highly precise, clean cuts in a variety of materials. Its high-quality machine components, precision saw blade, and matching guide rail system ensure extremely precise results. The saw's efficient dust extraction system and noise-reduced blade make work comfortable, especially indoors. Furthermore, its adjustable speed setting enables cuts in a multitude of materials. Image of Bosch GKT 55 GCE Professional saw Specifications

Makita GA4041C Information The Makita GA4041C is a 4-inch angle grinder that is designed for professional use. It is powered by a 1400W motor that provides a no-load speed of 2800-11000 rpm. The GA4041C features a "Super Joint System II" that helps to absorb vibration, making it more comfortable to use. It also has an electronic current limiter, a mechanical brake, and an anti-restart function. Image of Makita GA4041C angle grinder Here is a table of the full specifications of the Makita GA4041C:

Craftsman CMEG200 Information The Craftsman CMEG200 is a 7.5-amp, 4-1/2-inch angle grinder that is designed for demanding jobsite applications. It features a powerful motor that produces 12,000 RPM, a tool-free guard for quick and easy adjustments, and a contoured over-molded handle for added comfort. The CMEG200 also comes with a 2-position handle that allows for control in different applications. Image: Specifications:

Metabo SE 18 LTX 6000 Information The Metabo SE 18 LTX 6000 is a cordless impact wrench that is designed for professional use. It is powered by two 18V Li-ion batteries and has a maximum torque of 600 Nm. The wrench is equipped with a brushless motor that provides long runtime and durability. It also has a soft start function that prevents the wrench from stalling. Specifications